Author:
Hart E.L., ,Semencha O.O.,
Abstract
Shell structures are used in various industries, such the aerospace industry, the oil and gas industry, power engineering, mechanical engineering, construction, etc. Due to their design or manufacturing features, their integrity may be disrupted by the presence of various openings, around which local stresses develop. Finding ways to reduce stress concentrations around openings is an important problem in deformable solid mechanics. This paper presents the results of a computer simulation and a finite-element analysis of the stress and strain field of thin-walled cylindrical and truncated conical shells with circular openings in the presence of annular inclusions around them made of a material whose properties differ from the main material of the shells. The effect of the elastic modulus of an inclusion and its geometric parameters on the stress and strain concentration in the vicinity of the openings was studied. Several inclusion materials and inclusion widths were considered. An annular inclusion made of a homogeneous material and located in the shell plane was considered. Stress and strain intensity distributions in the local stress concentration zones were calculated. A comparative analysis of the results obtained for cylindrical and conical shells was carried out. The study showed that the presence of a “soft” homogeneous annular inclusion makes it possible to reduce the stress concentration around the opening by ~13–35% depending on the inclusion width and elastic modulus both for a cylindrical and a conical shell. Certain combinations of the geometric and mechanical parameters of the inclusion give rise to a “mechanical” effect, which consists in shifting the stress concentration zone from the opening edge to the inclusion – shell material interface. For conical shells, due to their geometric features, a “conical” effect occurs: the stresses increase not only in the vicinity of the opening-weakened zone, but also near the cone basis.
Publisher
National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
Reference16 articles.
1. 1. Avdonin A. S. Applied Methods of Calculation of Shells and Thin-Walled Structures. Moscow, 1969. 402 pp. (in Russian).
2. 2. Avramenko O. O. Analysis of the stress and strain field of non-thin orthotropic conical shells of variable thickness under nonuniform loading. New Materials and Technologies in Metallugry and Mechanical Engineering. 2011. Iss. 2. Pp. 103-107. (in Ukrainian).
3. 3. Bochkarev S. A., Matveyenko V. P. Panel flutter of rotating circular shells in a supersonic gas flow. Computational Continuum Mechanics. 2008. No. 3. Pp. 25-33. (in Russian).
4. 4. Vasiliev V. V. Mechanics of Composite Material Structures. Moscow, 1988. 272 pp. (in Russian).
5. 5. Hart E. L., Semencha O. O. Numerical investigation of the stress and strain field of an elastic trapezoidal plate with a rectangular opening and a tape inclusion. Problems in Computational Mechanics and Structural Strength. Dnipro, 2021. Iss. 33. Pp. 43-54. (in Ukrainian).