EVALUATION OF HEAT TRANSFER RATE OF DOUBLE-LAYERED HEAT SINK COOLING SYSTEM WITH HIGH ENERGY DISSIPATION
-
Published:2024
Issue:8
Volume:31
Page:19-37
-
ISSN:1065-5131
-
Container-title:Journal of Enhanced Heat Transfer
-
language:en
-
Short-container-title:J Enh Heat Transf
Author:
Lahmer El Bachir,Benhamou Jaouad,Admi Youssef,Moussaoui Mohammed Amine,Mezrhab Ahmed,Phanden Rakesh Kumar
Abstract
The present work evaluates thermal exchange through a double-layered mini-channel heat sink used as a cooling system for electronic components. Different factors influencing heat exchange enhancement were investigated using ANSYS-Fluent<sup>©</sup> software, which enables the simulation of the fluid flow and heat transfer. The evaluation of thermal exchange between the cold fluid and heated solid with high thermal dissipation has been accurately analyzed under the effect of system geometry, fluid nature, and cooling system material. The numerical outcomes demonstrated that the heat transfer quality
significantly increases with the variation of the system shape, where the cooling system presented a significant reduction of average temperature by around 62%-65%. In addition, using pure water as the system coolant improved the heat transfer rate by about 42%-47% for different Reynolds number values by comparing it with ethylene glycol. Concerning the cooling system materials, the selection of the materials depends on the analysis of their thermal properties with the evolution of temperature and thermal exchange. Therefore, using copper as a cooling material improves the overall performance of a
cooling system, delivering higher efficiency and performance.
Reference29 articles.
1. Ahangar, E.K., Fallah-Kharmiani, S., Khakhian, S.D., and Wang, L.P., A Lattice Boltzmann Study of Rarefied Gaseous Flow with Convective Heat Transfer in Backward Facing Micro-Step, Phys. Fluids, vol 32, no. 6, pp. 0620051-06200513, 2020. DOI: 10.1063/5.0008325 2. Ahmadian-Elmi, M., Hajmohammadi, M.R., Nourazar, S.S., Vafai, K., and Shafii, M.B., Introducing a New Cooling System Based on the Combined Use of Microchannel Heat Sinks and Pulsating Heat Pipes, Appl. Therm. Eng., vol. 232, p. 121102, 2023. DOI:10.1016/j.applthermaleng.2023.121102 3. Azzam, M., Hamdan, M.O., Alkhader, M., and Gerner, F.M., Analysis of Plate-Fin Heat Sink Infused with Phase Change Materials for Intermittent Space Missions, J. Enhanc. Heat Transf., vol. 30, no. 3, pp. 75-93, 2023. DOI:10.1615/JEnhHeatTransf.2023045767 4. Eiamsa-ard, S. and Promvonge, P., Numerical Study on Heat Transfer of Turbulent Channel Flow over Periodic Grooves, Int. Commun. Heat Mass Transf., vol. 35, no. 7, pp. 844-852, 2008. DOI: 10.1016/j.icheatmasstransfer.2008.03.008 5. Huang, H., Sun, T., Zhang, G., Li, D., and Wei, H., Evaluation of a Developed SST K-Omega Turbulence Model for the Prediction of Turbulent Slot Jet Impingement Heat Transfer, Int. J. Heat Mass Transf., vol. 139, pp. 700-712, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.05.058
|
|