Comparison of the Remaining Dentin Thickness in the Root after Hand and Four Rotary Instrumentation Techniques: An in vitro Study

Abstract

ABSTRACT Aim The aim of the present study was to compare the remaining dental thickness (RDT) in the mesiobuccal root of mandibular first molars at 3 and 7 mm from the anatomic apex after instrumentation with ProTaper, light speed LSX, K3 and M2 and to compare with that of K-files. Materials and methods In this study, 60 extracted, untreated human mandibular first molars with fully formed apices, with curvature less than 35° and no root resorption were used. Prepared specimens were cut horizontally at 3 and 7 mm short of anatomic apex. The least dentin thickness from canal to external root surface was observed under 3× magnification and recorded using Clemax measuring tool and the sections were reassembled. Group I—instrumentation with ProTaper, group II—instrumentation with K3, group III—instrumentation with Light Speed LSX, group IV—instrumentation with M2 and group V— instrumentation with K-files and RDT was measured. Results Results showed that group V removed lesser amount of dentin compared to all other groups while all the three instrumentation techniques removed almost equal amount of dentin apically. Clinical significance Cleaning and shaping of the root canal space involves the elimination of pathogenic contents as well as attaining a uniform specific shape. However, the RDT following the use of various intraradicular procedures is an important factor to be considered as an iatrogenic cause that may result in root fracture. To avoid this, newer rotary instruments are being introduced. How to cite this article Rao MSR, Shameem A, Nair R, Ghanta S, Thankachan RP, Issac JK. Comparison of the Remaining Dentin Thickness in the Root after Hand and Four Rotary Instrumentation Techniques: An in vitro Study. J Contemp Dent Pract 2013;14(4):712-717.