Domestic photo-cured acrylate glues for adhesive bonding microfluidic chips from polymethylmethacrylate-Reference-Cited by-同舟云学术

Domestic photo-cured acrylate glues for adhesive bonding microfluidic chips from polymethylmethacrylate

Published:2023-01-17 Issue:11-12 Volume: Page:47-50
ISSN:0554-2901
Container-title:Plasticheskie massy
language:
Short-container-title:Plastičeskie massy

Author:

Lukashenko T. A.¹,Zubik A. N.¹,Bulyanitsa A. L.¹,Rudnitskaya G. E.¹

Affiliation:

1. Institute for Analytical Instrumentation of the Russian Academy of Sciences

Abstract

It is shown that the adhesive bonding of microfluidic chips made of polymethylmethacrylate, bonded with domestic glues SM Chemie 301 and SM Chemie 700, withstand pressure up to 0.3 MPa (1 hour), as well as dynamic loads arising from repeated temperature changes from 60 to 95°C. These adhesives do not inhibit the polymerase chain reaction and can be recommended for bonding microfluidic chips for this method of molecular diagnostics.

Publisher

Publishing House Plastic Ltd

Subject

Polymers and Plastics,Chemical Engineering (miscellaneous)

Reference12 articles.

1. Harpaldas H., Arumugam S., Campillo Rodriguez C., Kumar B.A., Shi V., Sia S.K. Point-of-care diagnostics: recent developments in a pandemic age // Lab on a Chip. – 2021. – Vol. 21, No23. – P. 4517–4548. – DOI: 10.1039/d1lc00627d.

2. Yang J., Brooks C., Estes M., Hurth C., Zenhausern F. An integratable microfluidic cartridge for forensic swab samples lysis // Forensic Science International: Genetics. – 2014. – Vol. 8. – P. 147–158. – DOI: 10.1016/j.fsigen.2013.08.012.

3. Chen D., Mauk M., Qiu X. et al. An integrated, self-contained microfluidic cassette for isolation, amplification, and detection of nucleic acids // Biomedical Microdevices. – 2010. – Vol. 12, No4. – P. 705–719. – DOI: 10.1007/s10544-010-9423-4.

4. Лукашенко Т.А., Тупик А.Н., Рудницкая Г.Е., Буляница А.Л., Цымбалов А.И., Евстрапов А.А. Способы спекания, склеивания и химической сварки растворителем при изготовлении полимерных и полимер-стеклянных микрочиповых устройств // Научное приборостроение. – 2016. – Т. 26, No2. – С. 64–74. – DOI: 10.18358/np-26-2-i6474.

5. Лукашенко Т.А., Зубик А.Н., Буляница А.Л., Евстрапов А.А. Особенности неразъемного клеевого соединения деталей микрофлюидных устройств из полиметилметакрилата // Клеи. Герметики. Технологии. – 2020. – No11. – С. 23–28. – DOI: 10.31044/1813-7008-2020-0-11-23-28.