Abstract
Heat exchanger is one amongst promising thermal device in which heat transfer takes place between hot fluid and cold fluid. Among various classifications of warmth exchangers, the main focus was shown by researchers on indirect contact type compact heat exchangers. Among them the shell and tube device belongs to fluid to fluid type heat transfer device. Main applications of shell and tube device feed device in process industries, refineries, chemical plants and power plants. Usually the analysis of shell and tube heat exchangers are divided into two parts namely shell side and tube side analysis. Shell side analysis is easy and doesn't involve much modification. Whereas the tube side analysis is complex and it's done by varying baffle design and elevation with regard to arrangements of tubes. The most disadvantage of shell and tube device is pressure drop which occur at the end of tubes. To overcome this problem, drilled cylindrical copper block has been introduced to switch the tube part through which the new fluid flows and therefore the cold fluid is circulated through the shell. With this design modification, the effectiveness, mass rate, overall heat transfer co efficient are simulated and analysed.