ANALYSIS OF APPLICATION EFFICIENCY OF SINGLE AND DOUBLE ROW MECHANISED FIXTURES IN THE CONDITIONS OF SYNCHRONIZATION OF MINING WORKS AND FLOODING OF MINES-Reference-Cited by-同舟云学术

ANALYSIS OF APPLICATION EFFICIENCY OF SINGLE AND DOUBLE ROW MECHANISED FIXTURES IN THE CONDITIONS OF SYNCHRONIZATION OF MINING WORKS AND FLOODING OF MINES

Published:2023 Issue:1 Volume: Page:7-15
ISSN:1999-981X
Container-title:JOURNAL of Donetsk mining institute
language:en
Short-container-title:JDMI

Author:

Vlasov Sergey¹,Sadovenko Ivan¹,Moldavanov Yavhen²,Timchenko Svetlana¹

Affiliation:

1. Dnipro University of Technology

2. PJSC «DTEK Pavlohradvuhillia»

Abstract

Purpose. Determination of a rational option for using a type of mechanized fastening in the conditions of simultaneous flooding of mines and mining operations, taking into account the manifestations of hydrostatic pressure formed in the main roof of the coal seam. Method. The research used the method of numerical modelling and analysis of the displacement of the sole and roof of the coal seam and the prediction of the step-by-step progress of the cleaning pit in the layered transversely isotropic massif of rocks using the Solid Works 2019 software package. Results. Obtained statistical parameters of the use of mechanized fastening in the hydrogeotechnical conditions of the mines of Western Donbas based on the collected actual data of the mining enterprises of PJSC «DTEK Pavlogradvugillia». The reasonable feasibility of using a supporting and fencing four-pillar, two-row mechanized fastening of the KD-80 type by comparing the results of modelling its operation with a two-pillar single-row fastening of the Ostroj-70/125 type in conditions of a layered massif with manifestations of hydrostatic pressure. Scientific novelty. For the first time, a geotechnical forecast was performed on the basis of numerical comparative modelling of the operation of single- and double-row mechanized fasteners in the conditions of simultaneous flooding of the mine and mining operations, taking into account the manifestations of hydrostatic pressure, which is formed in the main roof of the coal seams of the mines of Western Donbas. When using two-pillar single-row fastening, the value of convergence can increase by more than 33%, in comparison with four-pillar two-row mechanized fastening of the support-fencing type. Practical significance. The research results make it possible to determine a rational option for using the type of mechanized fastenings for the complicated hydrotechnical conditions of coal mining from ultra-thin coal seams of the mines of Western Donbas, as well as to develop recommendations for technological improvement of mining operations, to minimize accidents associated with the subsidence of sections of mechanized fastening «on hard base», which significantly increases the efficiency of coal mining.

Publisher

Donetsk National Technical University

Subject

Materials Chemistry

Reference23 articles.

1. Sadovenko, I., & Tymoshchuk, V. I. (2012). Modeling of the mechanism of hydrogeodynamic loading of the main roof of coal seams above the mechanized attachment of the cleaning hole. [Modelyuvannya mehanizmu gidrogeodinamichnogo navantazhennya osnov-noyi pokrivli vugilnih plastiv nad mehanizova-nim kriplennyam ochisnogo viboyu] Collection of Research Papers of the National Mining University, (39), 5–11. http://ir.nmu.org.ua/han dle/123456789/147730?show=full (in Ukrainian)

2. Sdvyzhkova, O., Babets, D., Kravchenko, K., & Smirnov, A. (2015). Rock state assessment at initial stage of longwall mining in terms of poor rocks of Western Donbass. New Developments in Mining Engineering 2015. CRC Press. https://doi.org/10.1201/b19901 .

3. Sdvizhkova, Y., Babets, D., & Smirnov, A. (2014). Support loading of assembly cham-ber in terms of Western Donbas plough long-wall [Analiz zakonomernostej formirovaniya nagruzki na krep pri proektirovanii montazh-nyh kamer strugovyh lav v usloviyah Zapad-nogo Donbassa]. Naukovyi Visnyk Natsional-noho Hirnychoho Universytetu, (5), 26–32. http://www.nvngu.in.ua/index.php/en/-compo nent/jdownloads/finish/49-05/1454-2014-5-sdvi zhkova/0. (In Russian)

4. Medyanik, V., Shevchenko, A., & Pojmanov, S. (2013). Analysis of coal reserves development on seam С5 mine «Samarskaya» PSS «Mine management Ternovskoe» PJSC «DTEK Pavlogradugol» [Analiz vidpracyu-vannya zapasiv vugillya po plastu С5 ShP «Sa-marska» VSP «Shahtoupravlinnya Ternivske» PAT «DTEK Pavlogradvugillya»]. Mining of Mineral Deposits, 7, 171–182. http://dspace. nbuv.gov.ua/handle/123456789/104484. (In Russian)

5. Bondarenko, V. I., Kovalevskaya, I. A., Barabash, M. V., & Chervatyuk, V. G. (2015). Investigation of the loading of the lining of the treatment complex in difficult mining and geological conditions [Issledovanie nagruzhe-niya krepi ochistnogo kompleksa v slozhnyh gorno-geologicheskih usloviyah]. Coal of Ukraine, 6, 31–35. http://nbuv.gov.ua/UJRN/u gukr_2015_6 _7. (In Russian)