Vortex–airfoil interaction noise control using virtual serrations and surface morphing generated by leading-edge blowing

Abstract

Suppression of vortex–airfoil interaction noise from a rod-airfoil model by virtual serrations and surface morphing formed by the leading-edge (LE) blowing was investigated experimentally in an anechoic wind tunnel. The control efficiency of the virtual serrations and surface morphing was evaluated and analyzed by setting different air flow rates (Q), deflection angles (α), and orifice number (M). Noise measurements by far-field microphones show that both can effectively reduce the peak tonal noise generated by the vortex–airfoil interaction, with the control efficiency increasing with the increment of flow rate Q. As for the LE serration, the noise reduction increases with the virtual serration amplitude ratio Av (=Ub/U∞, Ub: blowing velocity; U∞: wind speed), but decreases slightly with the deflection angle α. A reduction of 12–14 dB is obtained when Av = 3.7 and α = 0° or 10°, and there exists a critical amplitude of Av = 1.5, under which no noise reduction is achieved. Compared to the serration at the same flow condition, the virtual surface morphing has much lower control efficiency, with a maximum noise reduction of 3–5 dB. The flow visualization by the particle image velocimetry technique reveals that both build buffer zones in the front of the airfoil LE, preventing the vortices from directly impinging upon the solid LE, thus reducing the intensity of vortex–airfoil interaction. In particular, the virtual serration breaks up the large-scale vortex structure into small-scale vortices, manifesting its high noise control efficiency.