Structural performance of a submerged bottom-mounted compound porous cylinder on the water wave interaction in the presence of a porous sea-bed

Abstract

Scattering problem of a submerged bottom-mounted compound porous cylinder located on a porous sea-bed is theoretically investigated under the assumption of linear potential flow theory. The compound cylinder is comprised of an impermeable inner cylinder and a porous outer cylinder. The boundary conditions on the porous boundaries follow Darcy's law by assuming fine pores in the porous structure. The whole fluid region is split into three bounded and unbounded sub-regions, within which the individual velocity potentials are found by using the eigenfunction expansion technique. Furthermore, utilization of the matching conditions along the boundaries of individual successive regions leads to a semi-analytical solution of the proposed problem. The impact of the non-dimensional porous-effect parameter of the cylindrical wall, the draft ratio, radius ratio, and the sea-bed porosity on wave loads and free-surface elevation are studied. In addition, the wave power dissipation for the system is calculated by integrating the power absorbed by the outer cylinder porous wall via direct method. Also, the far-field scattering coefficients are obtained with the help of asymptotic forms of Hankel functions in the plane wave representation form. Numerical results for the far-field scattering coefficient and power dissipation are investigated for various parameters. The theoretical model is verified by comparing it with the results of the conventional analytical work and experimental work. The results show that suitable consideration of porosity and structure parameters enhances the efficiency of the proposed compound cylinder in mitigating wave impact. Furthermore, the hydrodynamic wave load acting on the inner and outer cylinders can be reduced by the suitable positioning of the annular spacing of the system, which will provide explicit information for the purpose of engineering design in offshore and coastal regions.