Functionality in frequency tuning of magnetoelectric heterostructure integrated highly flexible bulk acoustic wave resonator

Abstract

Functional flexible piezo-resonators are of vital interest for designing micro-electrometrical system (MEMS) based high-frequency wearable devices. The magnetoelectric (ME) heterostructure comprising highly magnetostrictive Ni–Mn–In and piezoelectric AlN films was fabricated over flexible substrates to develop the bulk acoustic wave (BAW) resonator. The BAW resonators fabricated over Ni and Kapton substrates show the fundamental resonance at ∼5.535 and 5.400 GHz, respectively. The comparative study of frequency tuning for both resonators has been executed in the presence of a dc magnetic field. A larger frequency shift (ΔfR) of ∼540 MHz was detected at 1200 Oe for a device fabricated over Ni with a sensitivity of ∼5.4 Hz/nT. However, it is 360 MHz in the case of Kapton, with a sensitivity of ∼3.0 Hz/nT. Moreover, the BAW resonator over the magnetostrictive Ni substrate shows a higher tunability of ∼11.4% compared to ∼8.5% for the resonator fabricated over non-magnetostrictive Kapton. The equivalent modified Butterworth–Van Dyke circuit parameters have been extracted by fitting the experimental data with and without an external magnetic field using advanced design system. The effect of an external magnetic field has been thoroughly investigated on device parameters, such as electromechanical coupling coefficient (K2), acoustic velocity, quality factor (Q), and figure of merit. The anisotropic functionality of the fabricated resonator has been studied by measuring the tunability of the resonator in parallel and perpendicular magnetic fields. The present study motivates the incorporation of flexible magnetostrictive substrates for futuristic multifunctional MEMS magnetic field sensor applications.