Microstructural Analysis of Inconel 625 Nickel Alloy / UNS S31803 Duplex Stainless-Steel Dissimilar Weldments-Reference-Cited by-同舟云学术

Microstructural Analysis of Inconel 625 Nickel Alloy / UNS S31803 Duplex Stainless-Steel Dissimilar Weldments

Published:2019-06-08 Issue:1 Volume:44 Page:15-20
ISSN:2620-147X
Container-title:Advanced Technologies & Materials
language:en
Short-container-title:Adv.Tech&Mat.

Author:

Karahan Tuba¹^ORCID,Mert Tolga²^ORCID,Tümer Mustafa³^ORCID,Kerimak Zaim Mithat⁴

Affiliation:

1. İstanbul Gedik University, 34876 Kartal/İstanbul, Turkey

2. Yıldız Technical University, 34349 Beşiktaş/İstanbul, Turkey

3. Kocaeli University, 41180 Kartepe / Kocaeli, Turkey

4. Anadolu Casting Co, 51780 Körfez / Kocaeli, Turkey

Abstract

In this study, Inconel 625 nickel alloy and UNS 31803 duplex stainless steel (DSS) dissimilar pairs were welded with MIG welding process. Weld metal, obtained with ERNiCrMo-3 filler wire, was subjected to mechanical and microstructural investigations. Notch impact test and micro hardness measurements were realized on weld metal in order to evaluate31803 mechanical properties. Microstructural changes in fusion line of the base metals were examined using optical and electron microscopes. Phase precipitations rich of Ti and Mo elements were detected among dendritic austenite arms in the weld metal. It was observed that ERNiCrMo-3 filler metal had sufficient toughness because of high nickel content.

Publisher

Faculty of Technical Sciences

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Enhancing microstructure and mechanical properties of dissimilar TIG welded duplex 2205 and Ni-based inconel 718 superalloy through post weld heat treatment;Engineering Research Express;2024-05-17

2. Structural integrity and corrosion behavior assessment of the dissimilar gas tungsten arc welded joint of sDSS 2507/ IN625 superalloy;Materials Chemistry and Physics;2024-05

3. Microstructural evaluation of welded joints of ASTM Mar-M247 superalloy using ERNiCrMo-3 filler alloy;Matéria (Rio de Janeiro);2024

4. Investigation of mechanical and microstructural properties in joining dissimilar P355GH and stainless 316L steels by TIG welding process;International Journal of Pressure Vessels and Piping;2023-10

5. Studies on residual stresses and structural integrity of the dissimilar gas tungsten arc welded joint of sDSS 2507/Inconel 625 for marine application;Journal of Materials Science;2023-05