Author:
Wang Lihang,Cui Shaofei,Ma Chong,Zhang Lijie
Abstract
AbstractThe hydraulic parallel manipulator combines the high-power density of the hydraulic system and high rigidity of the parallel mechanism with excellent load-carrying capacity. However, the high-precision trajectory tracking control of the hydraulic parallel manipulator is challenged by the coupling dynamics of the parallel mechanism and the high nonlinearities of the hydraulic system. In this study, the trajectory control of a 3-DOF symmetric spherical parallel 3UPS/S manipulator is evaluated. Focusing on the highly coupling and nonlinear system dynamics, a compound impedance control method for a hydraulic driven parallel manipulator is proposed, which combines impedance control with the spatial motion characteristics of a parallel manipulator. The control strategy is divided into the inner and outer loops. The inner loop controls the impedance of the actuator in the joint space, and the outer loop controls the impedance of the entire platform in the task space to compensate the coupling of the actuators and improve the tracking accuracy of the moving platform. Compound impedance control does not require force or pressure sensors and is less dependent on modeling precision. The experimental results show that the compound impedance control effectively improves the tracking accuracy of the moving platform. This research proposes a compound impedance control strategy for a 3-DOF hydraulic parallel manipulator, which has high tracking precision with a simple and cheap system configuration.
Funder
National Natural Science Foundation of China
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference41 articles.
1. C F Yang, Q T Huang, J W Han, et al. Decoupling control for spatial six-degree-of-freedom electro-hydraulic parallel robot. Robotics and Computer-Integrated Manufacturing, 2012, 28(1): 14-23.
2. S H Koekebakker. Coordinate reconstruction in model based control of a stewart platform. IFAC Proceedings Volumes, 1998, 31(27): 103-108.
3. D Wang, J Wu, L P Wang, et al. A method for designing control parameters of a 3-DOF parallel tool head. Mechatronics, 2017: 102-113.
4. J T Yao, D L Wang, D J Cai, et al. Fault-tolerant strategy and experimental study on compliance assembly of a redundant parallel six-component force sensor. Sensors and Actuators A-Physical, 2017: 114-124.
5. M Honegger, R Brega, G Schweiter, et al. Application of a nonlinear adaptive controller to a 6 DOF parallel manipulator. International Conference on Robotics and Automation, San Francisco, California, 2000: 1930-1935.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献