On the Eccentrically Loaded Socket Footings With Cut - Off Pyramid Shaped Socket-Reference-Cited by-同舟云学术

On the Eccentrically Loaded Socket Footings With Cut - Off Pyramid Shaped Socket

Published:2019-06-01 Issue:1 Volume:15 Page:58-69
ISSN:2199-6512
Container-title:Civil and Environmental Engineering
language:en
Short-container-title:

Author:

Major Maciej¹,Major Izabela¹,Kuchárová Daniela²,Kuliński Krzysztof¹

Affiliation:

1. Faculty of Civil Engineering , Czestochowa University of Technology , ul. Akademicka 3, 42-200 Częstochowa , Poland .

2. Faculty of Civil Engineering , University of Žilina , Univerzitná 8215/1, 010 26 Žilina , Slovakia .

Abstract

Abstract In this work considerations concerning eccentrically loaded socket footing with cut-off pyramid shaped socket were presented. As an object of study sloped footing with 1.40 m height, corresponding to the maximum frost depth has been adopted. Knowing that in practice there are no perfect pure axial loads, load applied on the eccentricity has been taken into considerations. Eccentric loads result in footing rotation in the direction of eccentricity and acting load, hence one footing end is imbedding into the ground, whereas second end tries to rise up. To observe that phenomenon, elastic type of support under the foundation was introduced corresponding to the naturally humid sand with medium compaction. Presented in this paper considerations of innovative connection technology between footing and column were based on performed numerical studies. Advantages and disadvantages of presented footing in comparison to normal socket footings solutions were widely discussed. Numerical analyses were performed with the utilization Finite Element Method based SolidWorks software.

Publisher

Walter de Gruyter GmbH

Subject

Civil and Structural Engineering,Environmental Engineering

Link

https://www.sciendo.com/pdf/10.2478/cee-2019-0009

Reference20 articles.

1. [1] PRZEWŁÓCKI, J. - DARDZIŃSKA, I. - ŚWINIAŃSKI, J.: Review of historical buildings' foundations. Geotechnique, Vol. 55, No. 5, 2005, pp. 363 - 372.10.1680/geot.2005.55.5.363

2. [2] PN-EN 1992-1-1:2008/Ap1:2010, Eurocode 2: Concrete constructions design procedures, Part 1-1: General requirements and requirements for buildings, PKN, Warszawa 2008 (in Polish).

3. [3] PN-EN 1997-1:2008, Eurocode 7: Geotechnical design, Part 1: General rules, PKN, Warszawa 2008 (in Polish).

4. [4] KNAUFF, M. - KNYZIAK, P. - GOLUBIŃSKA, A.: Tables and equations for the design of reinforced concrete elements with calculations examples. Second edition, PWN, Warszawa 2014, 443 p. (in Polish).

5. [5] STAROSOLSKI, W.: Reinforced concrete structures in reference to Eurocode 2 and other national standards. Vol. 3, PWN, Warszawa 2012, 682 p. (in Polish).

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Static response of an original cut-off pyramid ended column-footing connection under Euler’s load;STRUCTURAL AND PHYSICAL ASPECTS OF CONSTRUCTION ENGINEERING 2022 (SPACE 2022): 5th International Scientific Conference;2023

2. The Role of Geotechnical Monitoring at Design of Foundation Structures and their Verification – Part 2;Civil and Environmental Engineering;2021-12-01

3. Using Software Applications in Teaching of Slope-Deflection Method in Subject Static Analysis of Constructions;International Journal of Education and Information Technologies;2021-09-10

4. Stress analysis of basic shapes of membrane structures;INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2019;2020