Transient Natural Convection in Partitioned Enclosures

Abstract

Abstract In this paper, the natural convection flow in a cavity heated differentially with a partition placed in the middle of the hot wall is numerically simulated. The aspect ratio of the geometry, Prandtl number are fixed at 0.24, 6.64, respectively, for different partitions lengths; however the Rayleigh number values were ranging from 106 to 3.77 × 109 in order to observe the transition regime. The fluid flow and the heat transfer described in terms of continuity, linear momentum and energy equations were predicted by using the finite volume method. To approach the physical reality experience, calculations were performed in a cavity with the same size and same priority of the fluid with an average temperature T m imposed on the cooled wall, also another simulation with an average temperature T m imposed on the horizontal wall. Time evolution, isotherms and mean Nusselt number are presented for all investigated values. Representative results illustrating the effects of the partition length for the heat transfer and the thermal boundary layer are also reported and discussed. The results indicate that the flow and heat transfer properties are altered by the presence of the partition, especially in the initial stage. In a certain sense, the partition blocks the flow and forces it to come off the hot wall. Since the partition parameters are critical for the transient natural convection flow in the cavity, different partition lengths on the warm wall have been studied.