DYNAMICS OF NON-UNIFORMITY LOADS OF AFC DRIVES

Abstract

Abstract The length of armoured face conveyors currently used in hard coal mines most often ranges between 200 m and 300 m. The machines are equipped with a main and auxiliary drive. Asynchronous motors mounted in conveyor drives feature the capacity of several hundreds of kilowatts. The non-uniform distribution of loads onto individual drives is observed in practice. The numerical value of loads distribution onto the individual armoured face conveyor drives is represented by a drive load distribution factor. It is defined as a ratio between the load of an electric motor installed in a given drive and the total conveyor load. The article presents a physical armoured face conveyor model intended for examining dynamic phenomena influencing the load non-uniformity of drives. Motion in this physical model is described with the system of (4 · j + 5) non-linear ordinary differential quotations of the second order. A mathematical model is obtained by adding functions describing the interwork of sprocket drums with chains and functions approximating the mechanical characteristics of asynchronous motors powered by means of frequency inverters. A large number of computer simulations was performed using this model enabling to study the impact on the load non-uniformity of drives of such parameters as motor slip, motor supply voltage drop, variations in supply voltage frequency, differences in the gear ratio of transmissions and differentiation in the pitch of scraper chain links along the chain contour.