Comparison of Methane Drainage Methods Used in Polish Coal Mines

Abstract

Abstract Methane drainage is used in Polish coal mines in order to reduce mine methane emissions as well as to keep methane concentration in mine workings at safe levels. This article describes methods of methane drainage during mining used in Polish coal mines. The first method involves drilling boreholes from tailgate roadway to an unstressed zone in roof or floor layers of a mined seam. It is the main method used in Polish mining, where both the location of drilled boreholes as well as their parameters are dependent on mining and ventilation systems of longwalls. The second method is based on drilling overlying drainage galleries in seams situated under or over the mined seam. This article compares these methods with regard to their effectiveness under mining conditions in Polish mines. High effectiveness of methane drainage of longwalls with different ventilation and methane drainage systems has been proven. The highest effectiveness of methane drainage has been observed for the system with overlying drainage gallery and with the parallel tailgate roadways. In case of classic U ventilation system of longwall panel, boreholes drilled from the tailgate roadway behind the longwall front are lost.