Scientific Basis for the Substantiation of Process Regulations for the Micro-Cutting of Hardened Gears
Author:
Klochko Alexander1, Basova Yevheniia1, Gasanov Magomediemin1, Zakovorotny Alexander1, Fedorenko Vitaly1, Myronenko Oleh2, Vorontsov Borys3, Ryazantsev Anton4, Protasov Roman5
Affiliation:
1. 1 National Technical University “Kharkiv Polytechnic Institute” , Kyrpychova str. 2, 61002 Kharkiv , Ukraine 2. 2 Donbass State Engineering Academy, 72 Akademichna St ., 84313, Kramatorsk, Donetsk region , Ukraine 3. 3 Institute of Mechanical Engineering , National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , Peremohy prosp., 37, Kyiv, 03056 , Ukraine 4. 4 Kryvyi Rih National University , Vitaly Matusevich str., 11, Kryvy Rih, 50027 , Ukraine 5. 5 Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering , Institute of Transport Technology and Engineering Design , Nám. Slobody 17, 812 31 Bratislava , Slovakia
Abstract
Abstract
The paper considers scientific principles of technological procedure development for the selection and assignment of parameters of velocity machining by blade tool at gear milling with due regard to the required parameters of the gear surface layer. Optimum micro-cutting conditions are determined when full participation in stock removal of all mill teeth is provided. Technological regulation of selection and setting of machining parameters is spread for gear hobbing of the spur gear wheels with fine-modular and coarse-modular hardness (220...320 HV) and after heat treatment (HRC46...63). Correlation with essential parameters of the surface layer, cutting depth, feed, speed and radius of rounding of the cutting edge of milling cutters’ teeth is established. It is scientifically grounded, tested, and proved at what modes of cutting, the radius of rounding of cutting edge of the cutting tool is made metal removal at oncoming and passing high-speed micro milling. The process of determining of minimal sliding angle, or maximum value (without the use of coolant and with coolant), in which there is no micro-cutting process taking into account variation of variable parameters of cutting conditions and geometrical parameters of hobbing cutters is modelled. For the first time, we ascertained the relation between the sliding angle and the maximum contact angle of the mill tooth with the work surface, which allowed determine the efficiency of the shaping process through coefficient (without coolant and with coolant).
Publisher
Walter de Gruyter GmbH
Subject
Mechanical Engineering
Reference34 articles.
1. Kovalev, V., Vasilchenko, Y., Klochko, A., Gasanov, M. “Technology of restoration of large gearboxes”. Dašić, P. (editor): Modern trends in metalworking, SaTCIP Publisher Ltd., Vrnjačka Banja, Serbia, Vol. 1. pp. 43 – 63, 2018. ISBN 978-86-6075-065-7 2. Klochko, A. “Technological bases of hardened large-module gears gear machining”, DGMA, Kramatorsk, Ukraine, 479 p., 2014. ISBN 978-966-379-667-3 3. Klochko, A., Hasanov, M., Basova, E., Palashek, S., Nevmerzhytskyi. A. “Study of the processes of gear milling of hardened chevron gears”, Tool reliability and optimisation of technological systems: a collection of scientific papers. Issue 40, pp. 90 – 101, DGMA, Kramatorsk, Ukraine, 2017. 4. Shapovalov, V., Klochko, A., Gasanov, M., Antsyferova, O., Belovol, A. “Optimising the technology of reconditioning large high precision gear rims”. The current state of scientific research and technology in the industry. Kharkiv, Ukraine, 3 (3), pp. 59 – 70, 2018. ISSN 2524-2296. 5. Fesenko, A., Basova, Y., Ivanov, V., Ivanova, M., Yevsiukova, F., Gasanov, M. “Increasing of Equipment Efficiency by Intensification of Technological Processes”, Periodica Polytechnica Mechanical Engineering, 2018. DOI: 10.3311/PPme.13198
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|