Design of industrial equipment data acquisition system based on ZYNQ

Abstract

Abstract In this paper, an industrial equipment data acquisition system based on a ZYNQ chip is constructed using an AD7607 data acquisition module containing a symmetric layout. Next, four modules of signal output, data writing, caching and communication are designed. Focusing on the design of the signal processing system after analog-to-digital conversion, the D-S evidence processing algorithm is utilized to judge the obtained data independently and fuse the data based on its D-S combination rule. Finally, the industrial equipment acquisition system design is tested, and the test includes system performance, accuracy, and stability. The frequency peaks obtained by the system in this paper are all 1000.000Hz, as shown by the results. The signal peak value of 95.18mV, the NI acquisition card signal peak value of 98.33mV, and the error is only 0.89%. The signal-to-noise ratio of the sampled signal is 50.12dB, and the effective number of bits reaches 10.40 bits. The performance of the system and the accuracy and stability of data acquisition on industrial equipment are verified.