Effect of silane coating surface treatment on friction and wear properties of carbon fiber/PI composites-Reference-Cited by-同舟云学术

Effect of silane coating surface treatment on friction and wear properties of carbon fiber/PI composites

Published:2022-08-01 Issue:2 Volume:40 Page:214-222
ISSN:2083-134X
Container-title:Materials Science-Poland
language:en
Short-container-title:

Author:

Yang Liu¹²,Bin Li¹,Yichuan He²³,Yuncheng Dong¹,Shiguo Wang¹

Affiliation:

1. Machinery Equipment Research Institute , Xinjiang Academy of Agricultural and Reclamation Science , Shihezi , , China

2. The Key Laboratory of Modern Agricultural Engineering in the Ordinary Colleges and Universities of Xinjiang , Tarim University , Alar , , China

3. College of Mechanical and Electrical Engineering , Tarim University , Alar , , China

Abstract

Abstract PAN-based carbon fiber was surface-modified with silane coating, and a composite material was prepared using a PI resin as a matrix. The structure and surface properties of carbon fibers were studied by means of X-ray photoelectron spectroscopy (XPS) and SEM. The tensile strength of the composite was measured by a tensile tester, and the friction properties of the composite were measured by a micro-nano mechanics comprehensive test system. The results show that treatment with silane coating can improve the surface roughness and chemical activity of carbon fiber, improve the interface between carbon fiber and PI resin matrix, and improve the tensile strength and wear rate of the composite.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.sciendo.com/pdf/10.2478/msp-2022-0022

Reference20 articles.

1. Durmus A, Kasgoz A, Ercan N, Akın D, Şanlı S. Effect of polyhedral oligomeric silsesquioxane (POSS) reinforced polypropylene (PP) nanocomposite on the microstructure and isothermal crystallization kinetics of polyoxymethylene (POM). Polym. 2012:53(23):5347–5357.

2. Sun LH, Yang ZG, Li XH. Study on the friction and wear behavior of POM/Al2O3 nanocomposites. Wear. 2008;64:693–700.

3. Joung-Man P, Zuo-Jia W, Dong-Jun K, Ga-Young G, Woo-Il L, Park J-K, et al. Compos Part B-Eng. 2012;43:2272–2278.

4. Alexopoulos ND, Bartholome C, Poulin P, Marioli-Riga Z. Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers. Compos Sci Technol. 2010;70(2):260–271.

5. Park JM, Kim PG, Jang JH, Wang ZJ, Kim W, Lee WI, et al. Lawrence DeVries. Self-sensing and dispersive evaluation of single carbon fiber/carbon nanotube (CNT)-epoxy composites using electro-micromechanical technique and nondestructive acoustic emission. Compos Part B-Eng. 2008;39(7–8):1170–1182.