Kinematic Comparison of a Heald Frame Driven by A Rotary Dobby with A Cam-Slider, A Cam-Link and A Null Modulator-Reference-Cited by-同舟云学术

Kinematic Comparison of a Heald Frame Driven by A Rotary Dobby with A Cam-Slider, A Cam-Link and A Null Modulator

Published:2021-09-01 Issue:3 Volume:21 Page:323-332
ISSN:2300-0929
Container-title:Autex Research Journal
language:en
Short-container-title:

Author:

Yin Honghuan¹,Yu Hongbin¹²,Wang Lei³

Affiliation:

1. School of Mechanical Engineering , Tianjin Polytechnic University , No. 399, Binshuixi Road, Xiqing District , Tianjin , China

2. Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology , Tianjin Polytechnic University , No. 399, Binshuixi Road, Xiqing District , Tianjin , China

3. School of Mechanical Engineering , Tianjin University , No. 92, Weijin Road, Nankai District , Tianjin , China

Abstract

Abstract The kinematics of the heald frame of a rotary dobby with two different modulator types are analyzed and compared. Kinematic mathematical models of the modulator main shaft, cam unit, and heald frame driven by the rotary dobby with a cam-slider modulator and a cam-link modulator were constructed based on two different cam contours derived from measured points on the conjugate cams of the two modulators. The motion characteristics of the two modulators and a null modulator, the cam unit, and the motion transmission unit are analyzed. The purpose of the present study was to establish the kinematic models, investigate the motion characteristics, and analyze their differences. At the same time, a calculation method for each motion transmission process was established and numerical models were developed. The results demonstrated that the two different modulators produce almost the same heald frame motion characteristics. Despite that both modulator types can be adapted to the requirements of a loom, the cam-link modulator can produce a more stable and reliable motion.

Publisher

Walter de Gruyter GmbH

Subject

General Materials Science

Link

https://www.sciendo.com/pdf/10.2478/aut-2019-0068

Reference29 articles.

1. Eren, R., Özkan, G., Turhan, Y. (2008). Kinematics of rotary dobby and analysis of heald frame motion in weaving process. Textile Research Journal, 78, 1070–1079.

2. Adanur, S. (2000). Handbook of weaving. CRC Press (U.S.A.), 110–113.

3. Eren, R., Özkan, G., Karahan, M. (2005). Comparison of Heald frame motion generated by rotary dobby and crank & cam shedding motions. Fibres & Textiles in Eastern Europe, 13(4), 78–83.

4. Korolev, P. A., Lohmanov, V. N. (2011). Kinematics of connections of the shedding mechanism of a circular loom TKP-110-U. Lzvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya, 4, 116–119.

5. Sadettin, K., Taylan, D. M., Ali, K. (2010). Cam motion tuning of shedding mechanism for vibration reduction of heald frame. Gazi University Journal of Science, 23(2), 227–232.