1. Evgenov, A.G., Shurtakov, S.V., Prager, S.M., and Sborshchikov, A.A., Degradation of synthesized material during cyclic use of recycled powders in selective laser melting (SLM) process. Part 1. Porosity and short-term strength at normal temperature, Materialovedenie, 2023, no. 5, pp. 35–47.
2. Ly, S., Rubenchik, A.M., Khairallah, S.A., Guss, G., and Matthews, M.J., Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing, Sci. Rep., 2017, vol. 7, no. 1, p. 4085. https://doi.org/10.1038/s41598-017-04237-z
3. Wang, Z., Wang, X., Zhou, X., Ye, G., Cheng, X., and Zhang, P., Investigation into spatter particles and their effect on the formation quality during selective laser melting processes, Comput. Model. Eng. Sci., 2020, vol. 124, no. 1, pp. 243–263. https://doi.org/10.32604/cmes.2020.09934
4. Evgenov, A.G., Shurtakov, S.V., Prager, S.M., and Malinin, R.Yu., On the development of a universal calculation method for assessing the degradation of recycled metal powder materials, depending on the cyclicity of use in the selective laser melting process, Aviats. Mater. Tekhnol., 2020, no. 4, pp. 3–11. https://doi.org/10.18577/2071-9140-2020-0-4-3-11
5. Sutton, A.T., Kriewall, C.S., Leu, M.C., and Newkirk, J.W., Characterization of heat-affected powder generated during the selective laser melting of 304L stainless steel powder, Proc. 28th Annu. Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., 2017, pp. 261–276.