Author:
Bessho Kotaro,Matsumura Hiroshi,Miura Taichi,Wang Qingbin,Masumoto Kazuyoshi,Matsuhiro Takeshi,Nagashima Yasuo,Seki Riki,Takahashi Tsutomu,Sasa Kimikazu,Sueki Keisuke
Abstract
Accelerator mass spectrometry (AMS) was applied to the analysis of 36Cl induced in concrete samples obtained from accelerator facilities. In order to use a small amount of concrete sample and to separate chlorine as pure as possible, an improvement of separation process was developped. Chlorine was extracted from 1–5 g of concrete into 0.01 M nitric acid in a pressurized decomposition vessel. After determining chlorine using ion chromatography, a certain amount of NaCl solution was added to obtain sufficient amounts of AgCl precipitate and to dilute to a suitable isotope ratio of 36Cl to 35Cl (36Cl/35Cl) for the AMS (10-12–10-10). A careful purification procedure was applied to reduce 36S interference in AMS. Good reproducibility and small error throughout the chemical process for sample preparation was attained. Depth profiles of 36Cl/35Cl in concrete of a medium-energy cyclotron were measured by the developed method and compared with the results of γ-emitters induced by thermal neutrons. Since it was confirmed that 36Cl was produced by thermal neutron capture of 35Cl, the thermal neutron fluence irradiated during accelerator operation could be obtained using 36Cl/35Cl. In order to estimate the neutron fluences, the 36Cl/35Cl measurement by AMS is more useful than radioactivity measurements of other isotopes such as γ-emitters because AMS directly provides the isotope ratio and the half-life of 36Cl is very long.
Subject
Physical and Theoretical Chemistry
Cited by
13 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献