Study of thermal characteristics of the radiator with vertical finning using aerosol evaporative cooling-Reference-Cited by-同舟云学术

Study of thermal characteristics of the radiator with vertical finning using aerosol evaporative cooling

Published:2020-11-25 Issue:1 Volume:5 Page:42-51
ISSN:2782-3989
Container-title:Energy Systems
language:en
Short-container-title:

Author:

Abed Akram¹,Hussein Hamid¹,Pakhaluev Valery²

Affiliation:

1. University of Technology – Iraq

2. Ural Federal University named First President of Russia B. Yeltsin

Abstract

The paper is dedicated to the new cooling scheme examination where aerosol is injected directly into the air-cooling system and then the evaporated aerosol is collected and redirected back to the inlet ports. It has examined the air-and-water aerosol influence on the heat extractor characteristics and area of the cooling surface of radiator with parallel square fins considering natural convection as well as radiation. Also, the influence of different characteristics has been examined, such as the concentration of water in aerosol, input power of heating, on the characteristics of the heat extractor.

Publisher

BSTU named after V.G. Shukhov

Reference22 articles.

1. Rong H. Y., Ming C. Optimum Longitudinal Convective Fins Arrays // Int. Communications in Heat and Mass Transfer. 1995. Vol. 22(3). P. 445-460., Rong, H.Y., & Ming, C. (1995). Optimum Longitudinal Convective Fins Arrays. Int. Communications in Heat and Mass Transfer, 22(3), 445-460. Available: https://doi.org/10.1016/0735-1933(95)00029-X

2. A new design of liquid-cooled heat sink by altering the heat sink heat pipe application: Experimental approach and prediction via artificial neural network / A. Taheri, M.G. Moghadam, M. Mohammadi et al. // Energy Conversion and Management. 2020. Vol. 206. P. 112485., Taheri, A., Moghadam, M.G., Mohammadi, M., Mohammad, P.-F., & Mohammad S. (2020). A new design of liquid-cooled heat sink by altering the heat sink heat pipe application: Experimental approach and prediction via artificial neural network. Energy Conversion and Management, 206, 112485. Available: https://doi.org/10.1016/j.enconman.2020.112485

3. Development and validation of a semi-empirical model for two-phase heat transfer from arrays of impinging jets / C. Mira-Hernández, M.D. Clark, J.A. Weibel, S.V. Garime // International Journal of Heat and Mass Transfer. 2018. Vol. 124. P. 782-793., Mira-Hernández, C., Clark, M.D., Weibel, J.A., & Garime S.V. (2018). Development and validation of a semi-empirical model for two-phase heat transfer from arrays of impinging jets. International Journal of Heat and Mass Transfer, 124, 782-793. Available: https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.047

4. Enhancing heat transfer in air-cooled heat sinks using piezoelectrically-driven agitators and synthetic jets / Y.Yu, T.W. Simon, M. Zhang et al. // International Journal of Heat and Mass Transfer. 2014. Vol. 184. P. 184-193., Yu, Y., Simon, T.W., Zhang, M., Yeom, T., North, M.T., & Cui T. (2014). Enhancing heat transfer in air-cooled heat sinks using piezoelectrically-driven agitators and synthetic jets. International Journal of Heat and Mass Transfer, 184, 184-193. Available: https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.001

5. Altun A.H., Ziylan O. Experimental investigation of the effects of horizontally oriented vertical sinusoidal wavy fins on heat transfer performance in case of natural convection // International Journal of Heat and Mass Transfer. 2019. Vol. 139. P. 425-431., Altun, A.H., & Ziylan O. (2019). Experimental investigation of the effects of horizontally oriented vertical sinusoidal wavy fins on heat transfer performance in case of natural convection. International Journal of Heat and Mass Transfer, 139, 425-431. Available: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.009