Normal tracing deflectometry using a secondary light source

Abstract

Scanning deflectometric profilers based on anf–θ system are typical optical tools used to measure mirror profiles at many synchrotron facilities. Unlike these profilers, which are based on a pencil beam, here a secondary light source and a pinhole are used to construct a system that automatically selects a beam that will always pass through the pinhole and propagate along the normal direction of the measured area on the surface under test. By measuring the angle variation of the selected beam, slope variations of the surface under test can be measured. Systematic errors introduced by manufacturing defects or aberrations of an optical element, which greatly degrade the performance of traditional profilers, could be minimized by using the developed method. Simulation values of the proposed method and a conventional method are compared.