Validation of a two-fluid turbulence model in comsol multiphysics for the problem of flow around aerodynamic profiles

Abstract

AbstractThe article presents a study of a two-fluid turbulence model in the Comsol Multiphysics software package for the problem of a subsonic flow around the DSMA661 and NACA 4412 airfoils with angles of attack of 0 and 13.87 degrees, respectively. In this paper, the finite element method is used for the numerical implementation of the turbulence equations. To stabilize the discretized equations, stabilization by the Galerkin least squares method was used. The results obtained are compared with the results of other RANS, LES, DES models and experimental data. It is shown that in the case of continuous flow around the DSMA661 airfoil, the results of the two-fluid model are very close to the SST results and are in good agreement with the experimental data. When flowing around the NACA 4412 airfoil, flow separation occurs and a recirculation zone appears. It is shown that in such cases the two-fluid model gives more accurate results than other turbulence models. Implementation of the Comsol Multiphysics software package showed good convergence, stability, and high accuracy of the two-fluid turbulence model.