Boundary quantitative characterization of the top-coal limit equilibrium zone in fully mechanized top-coal caving stope along the strike direction of working face

Abstract

AbstractIn the process of fully mechanized top-coal caving mining, the top-coal is affected by mining-induced stress, and the stress varies along the strike direction of working face, so the boundary position of its entering the limit equilibrium state changes accordingly. The determination of the boundary along the strike direction of working face can provide scientific guidance for the stability control of support-surrounding rock in fully mechanized top-coal caving face. Using the research methods of theoretical analysis, physical similarity simulation experiment and numerical simulation experiment, the stress state analysis model of the boundary position of the top-coal limit equilibrium zone under macro-scale conditions was established, the stress state characterization method of the boundary of the top-coal limit equilibrium zone along the strike direction of working face was given, and the quantitative characterization of the boundary of the top-coal limit equilibrium zone along the strike direction of working face was realized by combining with the mining-induced stress path, and the distance relationship between the boundary of the top-coal limit equilibrium zone and the langwall face along the strike direction of working face was revealed. The results show that after critical mining in fully mechanized top-coal caving face, the distance between the boundary of top-coal limit equilibrium zone and the langwall face along the strike direction of working face presents a relationship of increasing from top to bottom. The distance between the top-coal upper boundary and the langwall face was 2.85 m and the distance between the top-coal lower boundary and the langwall face was 5.39 m. The boundary of top-coal limit equilibrium zone along the strike direction of working face was verified by the top-coal elastic–plastic zone boundary and the boundary of the peak position of front abutment pressure in different layers of top-coal. The results show that the quantitative characterization of the top-coal limit equilibrium zone boundary along the strike direction of working face was reasonable. In order to improve mine production efficiency, optimization measures were put forward for hard coal seam and soft coal seam respectively.