Dynamical analysis of a damped harmonic forced duffing oscillator with time delay

Abstract

AbstractThis paper is concerned with a time-delayed controller of a damped nonlinear excited Duffing oscillator (DO). Since time-delayed techniques have recently been the focus of numerous studies, the topic of this investigation is quite contemporary. Therefore, time delays of position and velocity are utilized to reduce the nonlinear oscillation of the model under consideration. A much supplementary precise approximate solution is achieved using an advanced Homotopy perturbation method (HPM). The temporal variation of this solution is graphed for different amounts of the employed factors. The organization of the model is verified through a comparison between the plots of the estimated solution and the numerical one which is obtained utilizing the fourth order Runge–Kutta technique (RK4). The outcomes show that the improved HPM is appropriate for a variety of damped nonlinear oscillators since it minimizes the error of the solution while increasing the validation variety. Furthermore, it presents a potential model that deals with a diversity of nonlinear problems. The multiple scales homotopy technique is used to achieve an estimated formula for the suggested time-delayed structure. The controlling nonlinear algebraic equation for the amplitude oscillation at the steady state is gained. The effectiveness of the proposed controller, the time delays impact, controller gains, and feedback gains have been investigated. The realized outcomes show that the controller performance is influenced by the total of the product of the control and feedback gains, in addition to the time delays in the control loop. The analytical and numerical calculations reveal that for certain amounts of the control and feedback signal improvement, the suggested controller could completely reduce the system vibrations. The obtained outcomes are considered novel, in which the used methods are applied on the DO with time-delay. The increase of the time delay parameter leads to a stable case for the DO, which is in harmony with the influence of this parameter. This drawn curves show that the system reaches a stable fixed point which assert the presented discussion.