Impact of γ-irradiation and SBR content in the compatibility of aminated (PVC/LLDPE)/ZnO for improving their AC conductivity and oil removal

Abstract

AbstractIn some cases, blends containing PVC and LLDPE show low compatibility. Adding styrene-butadiene rubber to the PVC/LLDPE mixtures leads to a noticeable increase in tensile strength and compatibility of the blends. Also, an improvement in tensile strength is observed after incorporating SBR compatibilizer resulting in entirely different gamma irradiation doses. Without a compatibilizer, the mixture exhibits a distributed PVC and LLDPE phase with variable sizes and shapes; even a sizable portion of the domains resemble droplets. Styrene butadiene rubber (SBR) and gamma radiation make mixtures of (PVC/LLDPE) more compatible. The SEM study of the blends demonstrated that adding the compatibilizer resulted in finer blend morphologies with less roughness. At the same time, gamma irradiation reduced this droplet and gave a more smooth surface. Poly(vinyl chloride) (PVC) was chemically modified with four different amino compounds, including ethylene diamine (EDA), aniline (An), p-anisidine (pA) and dimethyl aniline (DMA) for improving the electric conductivity and oil removal capability of the blend polymer. All ionomers were prepared by nucleophilic substitution in a solvent/non-solvent system under mild conditions. This work novelty shows a sustainable route for producing oil adsorption materials by recycling plastic waste. After the amination process of poly(vinyl chloride) the oil adsorption was significantly enhanced.