Author:
Klymenko Serhiy,Zhang Hao,Savchenko Denys,Chumak Anatoliy,Klymenko Sergiy,Melniychuk Yuriy,Manokhin Andriy,Kremenytskyi Valerii V.,Novichenko Victor M.
Abstract
AbstractResearch into new composites utilizing cubic boron nitride (PcBN) shows promise for enhancing cutting tool performance. The unique properties of these materials stem from the addition of microfibers made of refractory compounds to their structure. This study looks at developing two-layer composites based on cBN group BL, reinforced with SiCw and Al2O3w microfibers. The goal is to improve tool stability when cutting hardened steels with impact loads. PcBN composite samples were made by sintering a mixture of cBN powder with bundles and microfibers under 7.7 GPa pressure. Bond material selection was based on analyzing the relationship between Poisson's ratio (η) and plasticity parameter (G/B). The density, Young's modulus, Poisson's ratio, and hardness of the composites were determined, and the microstructure of samples with TiCN bond was studied. Tool-life tests were conducted on two-layer cutting inserts made of PcBN reinforced with SiCw and Al2O3w microfibers during the machining of hardened KhVG steel (HRC 55) under impact loads at cutting speeds of 100 and 200 m/min.
Funder
National Academy of Sciences of Ukraine
Publisher
Springer Science and Business Media LLC
Reference23 articles.
1. Zhou, J., Bushlya, V., Avdovic, P. & Ståhl, J. E. Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools. Int. J. Adv. Manuf. Technol. 58(1–4), 141–151 (2011).
2. Costes, J. P., Guillet, Y., Poulachon, G. & Dessoly, M. Tool-lifeand wear mechanisms of CBN tools in cuttingof Inconel 718. Int. J. Mach. Tools Manuf. 47, 1081–1087 (2012).
3. Tanaka, H., Sugihara, T. & Enomoto, T. High speed machining of inconel 718 focusing on wear behaviors of PCBN cutting tool. Proc. CIRP 46, 545–548 (2016).
4. Sumiya, H., Harano, K. & Ishida, Y. Mechanical properties of nano-polycrystalline cBN synthesized by direct conversion sintering under HPHT. Diam. Relat. Mater. 41, 14–19 (2014).
5. Petrusha, I. A., Bushlya V. M. & Osipov O. S. Thermobaric cleaning and precision of carved composite cBN-TiC group BL with the finest hardened steel. Rock Cutting and Metal-Working Tools—A Technique and Technology of his Making and Application, Vol. 18, pp. 338–345 (2015).