PIV and CFD investigation of paddle flocculation hydrodynamics at low rotational speeds

Abstract

AbstractIn this study, flocculation hydrodynamics were evaluated by investigating the velocity field of turbulent flow experimentally and numerically, in a laboratory scale paddle flocculator. Turbulence that either promotes the particle aggregation or the breakage of flocs is complicated and has been considered and compared in this work using two turbulence models; namely, the SST k–ω and the IDDES. Results showed that IDDES provided very slight improvement as compared to SST k–ω, yielding the latter sufficient in accurately simulating the flow inside the paddle flocculator. A Goodness-of-Fit evaluation was adopted to study the convergence between PIV and CFD results, and to compare the results of the used CFD turbulence models. The study focused, as well, on the quantification of the slippage factor k, as 0.18 at low rotational speeds of 3 rpm and 4 rpm, and compared to conventional typical value of 0.25. This reduction of k from 0.25 to 0.18 yields around 27–30% increase in the power imparted to the fluid, and about 14% increase in velocity gradient (G). This implies that more mixing is provided than expected, and therefore, less energy is input and thus the electric consumption for the flocculation unit at a drinking water treatment plant could be potentially decreased.