Abstract
AbstractThe effect of non-isothermal treatment in oxygen-containing air, via heating rates of 10, 50, and 1000 °C/min until 1000 °C followed by furnace cooling to room temperature on oxides formed on directed laser energy additively fabricated IN718 was studied. Another set of samples heated up to 1000 °C using the same heating rates were isothermally held at 1000 °C for 1 hr followed by furnace cooling to room temperature. X-ray photoelectron spectroscopy indicated the presence of NiO on samples only heated at 1000 °C/min. Also, results indicated the absence of Fe-oxides on non-isothermally treated samples, irrespective of heating rate. However, isothermal treatment confirmed the presence of NiO on all samples and Fe-oxides on samples heated via 50 and 1000 °C/min. The durations in complement with the kinetics of the thermal treatments influenced oxide evolution in the samples. Such an experimental approach was adopted to study the material response under dynamic short duration-high temperature oxidation.
Publisher
Springer Science and Business Media LLC
Subject
Materials Chemistry,Materials Science (miscellaneous),Chemistry (miscellaneous),Ceramics and Composites
Reference35 articles.
1. Gibson, I., Rosen, D. & Stucker, B. Directed energy deposition processes. in Additive Manufacturing Technologies. 245–268 (Springer, 2015).
2. Saboori, A. et al. Application of directed energy deposition-based additive manufacturing in repair. Appl. Sci. 9, 3316 (2019).
3. Pantawane, M. V. et al. Spatial variation of thermokinetics and associated microstructural evolution in laser surface engineered in718: Precursor to additive manufacturing. Metall. Mater. Trans. A 52, 1–17 (2021).
4. Jinoop, A. N., Paul, C. P., Mishra, S. K. & Bindra, K. S. Laser additive manufacturing using directed energy deposition of Inconel-718 wall structures with tailored characteristics. Vacuum 166, 270–278 (2019).
5. Zhai, Y., Lados, D. A., Brown, E. J. & Vigilante, G. N. Understanding the microstructure and mechanical properties of ti-6al-4v and Inconel 718 alloys manufactured by laser engineered net shaping. Addit. Manuf. 27, 334–344 (2019).
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献