Development of Wireless Smart Current Sensor for Power Monitoring System-Reference-Cited by-同舟云学术

Development of Wireless Smart Current Sensor for Power Monitoring System

Published:2023-12-26 Issue:4 Volume:11 Page:1219-1224
ISSN:2347-470X
Container-title:International Journal of Electrical and Electronics Research
language:en
Short-container-title:IJEER

Author:

Shafeeq Abdullah Fawzi¹,Mahammad Maath Jasem¹,Salih Firas Fadhil²

Affiliation:

1. University of Anbar, College of Engineering, Department of Electrical Engineering, Al_Anbar, Iraq

2. University of Anbar, Renewable Energy Research Center, Al_Anbar, Iraq

Abstract

The traditional distribution network must be replaced by a smart grid, durable, and dependable, due to the rising demand for power by the customer. The smart grid will need a smart monitoring system based on the smart current sensor at all buildings to determine the power consumption with its costs. This paper proposed a wireless monitoring system for measuring the three-phase currents in the building by using three HW-666 current sensors with Arduino and ESP32 microcontrollers to transmit the data according to the Internet of Things (IoT) technique to the Telegram app on the mobile phone. The power consumption is determined by assuming the constant voltages and power factor at the building that is tested with this monitoring system. The results are scheduled on the personal computer (PC) by using the serial monitor of the Arduino software and also by receiving the message every 20 minutes on the telegram app furthermore, real-time data can be obtained immediately upon receiving transmitted commands from the Telegram application. In addition, this monitoring system is designed to cut off power to the building and sound an alarm if abnormal currents are detected. The proposed monitoring system is given the same results when a comparison with the ammeter with errors not exceeding 10%.

Publisher

FOREX Publication

Subject

Electrical and Electronic Engineering,Engineering (miscellaneous)

Reference23 articles.

1. K. Matsui, Y. Yamagata, and S. Kawakubo, “Real-time sensing in residential area using IoT technology for finding usage patterns to suggest action plan to conserve energy,” Energy Procedia, vol. 158, pp. 6438–6445, 2019, doi: 10.1016/j.egypro.2019.01.171.

2. M. D. Mudaliar and N. Sivakumar, “IoT based real time energy monitoring system using Raspberry Pi,” Internet of Things (Netherlands), vol. 12, p. 100292, 2020, doi: 10.1016/j.iot.2020.100292.

3. A. H. Alavi, P. Jiao, W. G. Buttlar, and N. Lajnef, “Internet of Things-enabled smart cities: State-of-the-art and future trends,” Meas. J. Int. Meas. Confed., vol. 129, no. July, pp. 589–606, 2018, doi: 10.1016/j.measurement.2018.07.067.

4. Z. S. Ageed et al., “A State of Art Survey for Intelligent Energy Monitoring Systems,” Asian J. Res. Comput. Sci., vol. 8, no. 1, pp. 46–61, 2021, doi: 10.9734/ajrcos/2021/v8i130192.

5. M. U. Farooq, M. Waseem, S. Mazhar, A. Khairi, and T. Kamal, “A Review on Internet of Things,” Int. J. Adv. Res. Sci. Commun. Technol., vol. 113, no. 1, pp. 135–144, 2015, doi: 10.48175/ijarsct-2251.