Ethanol Steam Reforming in a Two-Step Process. Short-Time Feasibility Tests-Reference-Cited by-同舟云学术

Ethanol Steam Reforming in a Two-Step Process. Short-Time Feasibility Tests

Published:2013-02-22 Issue:3 Volume:27 Page:1570-1575
ISSN:0887-0624
Container-title:Energy & Fuels
language:en
Short-container-title:Energy Fuels

Author:

Vinci A.¹,Chiodo V.²,Papageridis K.³,Cavallaro S.¹,Freni S.²,Tsiakaras P.³,Bart J. C. J.¹

Affiliation:

1. Dipartimento di Ingegneria Elettronica, Chimica e Ingegneria Industriale (DIECII), Università degli Studi di Messina, Viale F. Stagno D’Alcontres, 31, 98166 Messina, Italy

2. Istituto TAE-CNR, Salita Santa Lucia Sopra Contesse, 5, 98126 Messina, Italy

3. Department of Mechanical Engineering, School of Engineering, University of Thessaly, Pedion Areos, 38334 Volos, Greece

Publisher

American Chemical Society (ACS)

Subject

Energy Engineering and Power Technology,Fuel Technology,General Chemical Engineering

Link

https://pubs.acs.org/doi/pdf/10.1021/ef302037p

Reference29 articles.

1. Hydrogen production by ethanol steam reforming over a commercial Pd/γ-Al2O3 catalyst

2. Wu, C.; Wu, F.; Bai, Y.; Liu, Y.; Sun, J.Hydrogen generation from ethanol steam reforming over rare earth promoted nickel-based catalysts. Presented at the International Conference on Control and Automation, Guangzhou, June 30, 2007.

3. Steam-reforming of ethanol for hydrogen production

4. A review on reforming bio-ethanol for hydrogen production

5. A review of biomass-derived fuel processors for fuel cell systems

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Syngas production by catalytic steam gasification of citrus residues;International Journal of Hydrogen Energy;2017-11

2. Pyrolysis of different biomass: Direct comparison among Posidonia Oceanica, Lacustrine Alga and White-Pine;Fuel;2016-01

3. Biogas reforming process investigation for SOFC application;Energy Conversion and Management;2015-07

4. Steam Reforming of Ethanol by a Nickel Nanowire Catalyst;Applied Mechanics and Materials;2014-09