Electrolyte Regulation in Stabilizing the Interface of a Cobalt-Free Layered Cathode for 4.8 V High-Voltage Lithium-Ion Batteries-Reference-Cited by-同舟云学术

Electrolyte Regulation in Stabilizing the Interface of a Cobalt-Free Layered Cathode for 4.8 V High-Voltage Lithium-Ion Batteries

Published:2024-02-29 Issue:10 Volume:16 Page:12554-12562
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Ma Mingyuan¹,Zhu Zhenglu¹,Yang Dan¹,Qie Long²^ORCID,Huang Zhimei³,Huang Yunhui¹²^ORCID

Affiliation:

1. Institute of New Energy Vehicles, School of Materials Science and Engineering, Tongji University, Shanghai 201804, P. R. China

2. State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, P. R. China

3. School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, P. R. China

Funder

National Natural Science Foundation of China

Natural Science Foundation of Anhui Province

Publisher

American Chemical Society (ACS)

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.3c18711

Reference50 articles.

1. High-nickel layered oxide cathodes for lithium-based automotive batteries

2. Understanding of performance degradation of LiNi0.80Co0.10Mn0.10O2 cathode material operating at high potentials

3. Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

4. Improvement of superior cycle performance of LiNi0.8Co0.15Al0.05O2 cathode for lithium-ion batteries by multiple compound modifications

5. Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?