The optimization of heterogeneous catalytic conditions in the direct alkylation of waste vegetable oil

Abstract

Alkylated waste vegetable oil is a versatile intermediate product in the synthesis of bio-based materials. Heterogeneous catalytic condition with high conversion rate in the direct alkylation of waste vegetable oil was reported and the deactivation mechanism of catalyst was revealed. The total exchange capacity, elemental composition and pyrolysis product of catalyst before and after the alkylation reaction were analysed by back titration, elemental analysis, electrospray ionization mass spectrometry, gas chromatography mass spectrometry and pyrolysis-gas chromatography/mass spectrometry, respectively. The results indicated that the metallic and non-metallic (C, H) elements contents of the catalyst have very much increased with great changes in pyrolysis product and a slight decrease in the total exchange capacity. The formation of insoluble polymers through Diels–Alder cycloaddition between triglycerides was proved to be the major factor causing the dysfunction of the catalytic centre. The metal ions from corrosion of the reactor were the minor factor causing about 2.56% loss of the catalytic centre. Moreover, the catalyst was able to maintain high catalytic efficiency when replacing the raw materials with other waste vegetable oil having low concentration of polyunsaturated fatty acids, which is significant for producing not only the aryl fatty acids derivatives but also the bio-based surfactants.