Localized Surface Plasmon Resonance Studies on Pd/C Nano-Composite System: Effect of Metal Concentration and Annealing Temperature

Abstract

The effects of metal concentration and annealing temperature on the localized surface plasmon resonance (LSPR) properties of the Pd nanoparticles (NP) dispersed in carbon were investigated. The Pd/C nano-composite thin films with 7 to 39 atomic % concentration of metal content were deposited using the atom beam co-sputtering techniques and subjected to annealing at temperature varying from 300 °C to 600 °C. The UV-vis spectroscopy studies on as-prepared films displayed a Mie scattering profile, but not well-defined LSPR bands were observed for all the values of Pd concentration. This is attributed to the smaller size (3–4 nm) of Pd NPs and rough Pd/C interface, as confirmed from TEM studies. When samples were annealed at a temperature of 300 °C, three broad LSPR absorption bands in the visible region, along with a sharp peak at 210 nm, were observed and the effect of Pd concentration variation was insignificant on their position. The multiple LSPR bands were observed due to agglomeration NPs, which is consistent with earlier reports and is also observed in the TEM images. When annealing temperature was subsequently increased to 500 °C, a blue shift in the LSPR peak position with an increase in the Pd concentration was observed, which phenomena is attributed to the formation of bigger NPs with the formation of sharp NPs-interface at high temperature upon annealing. A monotonic increase in the magnitude and decrease in the FWHM with an increase in concentration suggested change in the dielectric function of sample due to the growth of NPs. This is further confirmed from XRD studies, where strain relaxation and grain growth were observed. The intensity of the SPR peak decreased with an increase in the annealing temperature. The LSPR peak disappeared on annealing at a temperature of 600 °C, suggesting the formation of continuous polycrystalline thin films of Pd. In summary, NPs size, metalmatrix interface, and concentration of metal play key roles in the tailoring the LSPR properties of the Pd.