Bend-Insensitive Discrimination of Strain and Temperature Based on Fiber Transmission Grating Inscribed on High Birefringence Photonic Crystal Fiber

Abstract

In this paper, we propose a bend-insensitive optical fiber sensor capable of separately measuring strain and temperature by incorporating a fiber transmission grating (FTG) inscribed on high birefringence photonic crystal fiber (HBPCF) with a CO2 laser. The FTG was fabricated by exposing unjacketed HBPCF to CO2 laser pulses using the line-by-line technique. The FTG inscribed on HBPCF, referred to as the HBPC-FTG, has two resonance dips with different wavelengths depending on input polarization. These two resonance dips were utilized as sensor indicator dips denoted by a shorter wavelength dip (SD) and a longer wavelength dip (LD). The strain and temperature responses of the SD and LD were investigated in a strain range of 0 to 3105 μ and a temperature range of 30 to 85 °C, respectively. The measured strain sensitivities of the SD and LD at room temperature (25 °C) were approximately −0.46 and −0.58 pm/μ, respectively. Similarly, the measured temperature sensitivities of the SD and LD without applied strain (0 μ) were ˜5.99 and ˜9.89 pm/°C, respectively. Owing to their linear and independent responses to strain and temperature, strain and temperature changes applied to the HBPC-FTG can be simultaneously estimated from the measured wavelength shifts of the two indicator dips (i.e., SD and LD) using their predetermined strain and temperature sensitivities. Moreover, bend-induced spectral variations of the SD and LD were also examined in a curvature range of 0–4.705 m−1, and it was observed that both dips showed little wavelength shift due to applied bending. Thus, it is concluded from the experimental results that the fabricated HBPC-FTG can be employed as a cost-effective sensor head for bend-insensitive discrimination of strain and temperature.