Magnetic properties and structure of carbon steel samples manufactured by selective laser melting and subjected to fatigue tests-Reference-Cited by-同舟云学术

Magnetic properties and structure of carbon steel samples manufactured by selective laser melting and subjected to fatigue tests

Published:2024-08-23 Issue:7 Volume: Page:62-66
ISSN:0130-3082
Container-title:Дефектоскопия
language:
Short-container-title:Defektoskopiâ

Author:

Gordeev N. V.¹²,Stashkov A. N.¹,Matosyan A. M.¹²,Korkh M. K.¹,Nichipuruk A. P.¹,Shishkin D. A.¹,Shirinkina I. G.¹

Affiliation:

1. M.N. Mikheev lnstitute of Metal Physics of Ural Branch of Russian Academy of Sciences

2. Ural Federal University named after the first President of Russia B.N. Yeltsin

Abstract

This study investigates the magnetic properties and structure of 09G2S steel samples fabricated using casting and selective laser melting methods. Fatigue bending tests with cantilever fixation were performed to analyze these properties. It was found that the fatigue curve for 3D-printed steel lies below that of cast steel with a similar chemical composition. Both the coercive force and residual magnetic induction are lower near the fracture site. The greater the number of cycles to failure, the smaller the difference in coercive force and residual magnetic induction in different parts of the sample. The nature of fatigue failure differs between cast and 3D-printed steel. The cast 09G2S steel sample exhibits a straight and homogeneous fatigue fracture without visible crack initiation sites. In contrast, the 3D-printed steel samples show heterogeneous fractures with localized zones of failure and tear-off ridges.

Publisher

The Russian Academy of Sciences

Reference7 articles.

1. Erasov V.S., Oreshko E.I. Ispytaniia na ustalost' metallicheskikh materialov (obzor) CHast' 1. Osnovnye opredeleniia, parametry nagruzheniia, predstavlenie rezul'tatov ispytanii // Aviatsionnye materialy i tekhnologii. 2020. № 4. P. 59—70.

2. Anosov M.S., Riabov D.A., Chernigin M.A., Solov'ev A.A. Nerazrushaiushchii kontrol' nakopleniia ustalostnykh povrezhdenii v stali sv-09G2S, poluchennoi 3D-pechat'iu elektrodugovoi naplavkoi // Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova. 2023. T. 21. № 2. P. 47—53.

3. Mantserov S.A., Anosov M.S., Ital'iantsev D.S. Diagnostika strukturnoi povrezhdennosti stali 09G2S, poluchennoi s ispol'zovaniem tekhnologii WAAM pri malotsiklovoi ustalosti na osnove neiro-nechetkoi klassifikatsii // Morskoi vestnik. 2023. № 2. P. 32—36.

4. Bus'ko V.N., Nichipuruk A.P., Stashkov A.N. Metodika mekhanicheskikh ispytanii i issledovanie vozmozhnosti kontrolia ustalostnoi prochnosti magnitoshumovym metodom stal'nykh obraztsov, izgotovlennykh po additivnoi tekhnologii // Kontrol'. Diagnostika. 2024. № 4. P. 54—63.

5. Bus'ko V.N. Laboratornaia ustanovka dlia issledovaniia ustalostnoi povrezhdaemosti ploskikh ferromagnitnykh obraztsov // Pribory i tekhnika eksperimenta. 2011. No. 1. P. 165—167.