The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Structure and Phase Composition of Metastable Austenitic Steel-Reference-Cited by-同舟云学术

The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Structure and Phase Composition of Metastable Austenitic Steel

Published:2023-05-01 Issue:5 Volume:124 Page:409-416
ISSN:0015-3230
Container-title:Физика металлов и металловедение
language:
Short-container-title:Fizika metallov i metallovedenie

Author:

Savrai R. A.¹,Skorynina P. A.¹,Makarov A. V.¹²,Men’shakov A. I.³⁴,Gaviko V. S.²

Affiliation:

1. Institute of Engineering Science, Ural Branch, Russian Academy of Sciences

2. Mikheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences

3. Institute of Electrophysics, Ural Branch, Russian Academy of Sciences

4. Ural Federal University Named after the First President of Russia B.N. Yeltsin

Abstract

The features of the structure and phase composition of corrosion-resistant austenitic chromium–nickel steel (16.80 wt % Cr, 8.44 wt % Ni) subjected to carburizing in electron beam plasma at temperatures of 350 and 500°C, frictional treatment with a sliding indenter, and a combination of frictional treatment and plasma carburizing have been considered. It has been established that plasma carburizing results in the formation of a modified surface layer consisting of carbon-saturated austenite and carbides (Cr23C6, Fe3C); in this case, the formation of γC-phase occurs only at a temperature of 350°C. The depth of a modified layer increases with an increase in the carburizing temperature. It has been shown that it is useful to perform combined frictional treatment and plasma carburizing at a carburizing temperature of 350°C, since in this case the deformation-induced structure formed as a result of frictional treatment is preserved, and the precipitated carbides remain highly dispersed. In this case, frictional treatment should provide the formation of the deepestpossible diffusion-active layer with a dispersed structure.

Publisher

The Russian Academy of Sciences

Reference32 articles.

1. Макаров А.В., Скорынина П.А., Юровских А.С., Осинцева А.Л. Влияние технологических условий наноструктурирующей фрикционной обработки на структурно-фазовое состояние и упрочнение метастабильной аустенитной стали // ФММ. 2017. Т. 118. № 12. С. 1300–1311.

2. Savrai R.A., Makarov A.V., Malygina I.Yu., Rogovaya S.A., Osintseva A.L. Improving the strength of the AISI 321 austenitic stainless steel by frictional treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2017. Is. 5. P. 43–62. http:// dream-journal.org/issues/2017-5/2017-5_149.html.

3. Наркевич Н.А., Шулепов И.А., Миронов И.П. Структура, механические и триботехнические свойства аустенитной азотистой стали после фрикционной обработки // ФММ. 2017. Т. 118. № 4. С. 421–428.

4. Макаров А.В., Коршунов Л.Г. Металлофизические основы наноструктурирующей фрикционной обработки сталей // ФММ. 2019. Т. 120. № 3. С. 327–336.

5. Макаров А.В., Скорынина П.А., Волкова Е.Г., Осинцева А.Л. Влияние фрикционной обработки на структуру, микромеханические и трибологические свойства аустенитной стали 03Х16Н14М3Т // МиТОМ. 2019. № 12. С. 21–24.