Surface modification of aluminum and chromium by ion implantation of nitrogen with a high current density ion implanter and plasma-source ion implantation

Abstract

Results of ion implantation of nitrogen into electrodeposited hard chromium and pure aluminum by a high-dose ion-beam source are presented and compared to plasma-source ion implantation. The large-area, high current density ion-beam source can be characterized, with respect to surface modification use, by a uniform emitted dose rate in the range of 1016 to 5 × 1017 N cm−2 min−1 over an area of <100 cm2 and with acceleration energies of 10–50 keV. The implantation range and retained dose (measured using ion-beam analysis), the surface hardness, coefficient of friction, and the change in the wear coefficient (measured by nanohardness indentation and pin-on-disk wear testing) that were obtained with an applied dose rate of ∼1.7 × 1017 N cm−2 min−1 at 25 kV are given, and they are compared to results obtained with plasma-source ion implantation.