Optimization of 12Х18Н9Т-Steel Processing by Ring Laser Beams-Reference-Cited by-同舟云学术

Optimization of 12Х18Н9Т-Steel Processing by Ring Laser Beams

Published:2023-06-06 Issue:3 Volume:22 Page:186-192
ISSN:2414-0392
Container-title:Science & Technique
language:
Short-container-title:Nauka teh.

Author:

Bayevich G. A.¹,Nikitjuk Yu. V.¹,Myshkovets V. N.¹,Maximenko A. V.¹,Aushev I. Yu.²

Affiliation:

1. Francysk Skaryna Gomel State University

2. University of Civil Protection of the Ministry for Emergency Situations of the Republic of Belarus

Abstract

Using the MOGA genetic algorithm built into the DesignXplorer module of the ANSYS Workbench program, optimization of laser processing of 12Х18Н9Т-steel by annular beams has been performed. The calculation of temperature fields has been carried out taking into account the dependence of the thermophysical properties of the material on temperature by the finite element method in the ANSYS Workbench program. A regression model has been obtained for processing 12Х18Н9Т-steel by annular laser beams using a face-centered variant of the central compositional plan of the experiment. The power density and duration of laser radiation pulses, the outer and inner diameters of the laser beam in the processing plane were used as variable factors. The penetration depths of the material and the maximum temperatures in the laser processing zone were used as responses. The influence of processing parameters on the penetration depths of the material in the laser impact zone and the maximum temperature values has been evaluated. It has been established that the depth of penetration of the material and the maximum temperatures are most affected by the power density of laser radiation. Optimization of laser processing of 12Х18Н9Т-steel by annular beams was carried out by setting the limiting values of the maximum tempe-rature in the processing zone for three variants of the minimum penetration depth. The parameters obtained as a result of optimization using the MOGA algorithm and the parameters obtained as a result of finite element modeling are compared. The maximum relative error of the results when determining the maximum temperatures did not exceed 1 % and when determining the maximum penetration depths did not exceed 6 %.

Publisher

Belarusian National Technical University

Subject

General Medicine

Reference17 articles.

1. Grigoryants A. G., Shiganov I. N., Misyurov A. I. (2006) Technological Processes Oflaser Processing. Moscow, Bauman Moscow State Technical University, 664 (in Russian).

2. Bokut' B. V., Kondratenko V. S., Myshkovets V. N., Serdyukov A. N., Shalupaev S. V. (1987) Thermoelastic Fields in Solids During their Processing by Laser Beams of Special Geometry. Preprint. B. I. Stepanov Institute of Physics of the National Academy of Sciences of Belarus. Minsk, 59 (in Russian).

3. Myshkovets V. N., Maximenko A. V., Shalupaev S. V., Kamornikov I. M., Nikityuk Yu. V. (2001) Annular Beam Laser Processing Machine. Patent No. 235 Republic of Belarus (in Russian).

4. Solonevich, S. V., Ryzhevich, A. A., Kazak, N. S., Al'-Mukhanna M. K., Al'-Khovaiter S. Kh., Al'-Saud T. S. M. (2011) Tunable Ring Light Fields and Their Possibilities for Laser Processing of Materials. Vzaimodeistvie Izluchenii s Tverdym Telom: Materialy 9-i Mezhdunar. Konf., Minsk, 20–22 Sent. 2011 g. = Interaction of Radiation with Solids: Proceedings of the 9th International Conference, Minsk, September 20–22, 2011. Minsk, 451–452 (in Russian).

5. Maximenko А. В., Myshkovets V. N., Shapovalov P. S. (2010) Pulsed Laser Cladding of Structural Steels with Annular Beams. Vestnik GGTU im. P. O. Sukhogo = Bulletin Sukhoi State Technical University of Gomel, (4), 63–68 (in Russian).