Design of Volume Parameters of Large-Particle-Size Asphalt Mixture Based on the Vertical Vibration Compaction Method

Abstract

Volume parameters such as the volume of voids (VV), voids filled with asphalt (VFA), and voids in mineral aggregates (VMA) all have significant impact on asphalt mixtures. In this study, the vertical vibration compaction method (VVCM) was employed to produce a large-particle-size asphalt mixture (LSAM-50). The correlations between the mechanical strengths of VVCM specimens, static compression test (PCT) specimens, and in situ core samples were verified. Additionally, the influence of volumetric parameters on the mechanical properties of VVCM specimens was assessed. Based on the principle of optimal mechanical properties, volume parameter design standards for the LSAM-50 asphalt mixture were proposed. Results indicated that the mechanical properties correlation between VVCM specimens and in situ core samples was substantial, reaching over 90%. With increasing VV and VFA, the compressive strength, splitting strength, and dynamic stability of the LSAM-50 asphalt mixture initially increased and then decreased. The design standards for VV were proposed to be between 3.5% and 4.8%, and for VFA between 49.7% and 52.9%. There was no clear correlation between VMA and the mechanical properties of the mixture; hence, based on the standards, the minimum design value for VMA was set at 7.5%.