Affiliation:
1. Department of Wood Science and Technology, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 1, 61300 Brno, Czech Republic
Abstract
This article discusses the non-destructive evaluation of the mechanical properties of green wood. To estimate the dynamic flexural modulus of elasticity (MOED), a non-destructive test (NDT) method—the frequency resonance technique (FRT)—was used. A three-point bending test was carried out to determine the static bending properties as the bending modulus of elasticity (MOE), the modulus of rupture (MOR), and bending toughness (Aw). This article presents the results of a study comparing the correlations between the dynamic and static bending parameters of beech (Fagus sylvatica L.) and oak (Quercus robur L.) wood, which was further divided into heartwood and sapwood. These species were chosen as the most widespread representatives of diffuse-porous and ring-porous hardwoods. This study found statistically significant differences in most mechanical parameters between the two species, except for MOR. Among the investigated parameters, beech had higher values than oak (by 22.1% for MOED, 9.5% for MOE, and 12.1% for Aw). Furthermore, relevant correlations (R > |0.7|) were established between MOED and between some of the static flexural parameters. These correlations were stronger for beech, which due to its more homogeneous structure showed less data variability than the ring-porous oak.
Funder
Internal Grant Schemes of Mendel University in Brno
ESF
Ministry of Education Youth and Sports in the Czech Republic
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献