Viability of Bauxite Deposits from Catalonia (Spain) for Ceramic Applications

Abstract

This study provides a characterization of materials from wastes and outcrops of two inactive bauxite mines located close to Sant Joan de Mediona and Peramola, Spain. Mineralogy was determined via powder X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Thermal properties were measured via differential thermal analysis–thermogravimetry (DTA-TG) and gresification tests. The crystalline phases are medium-high crystalline kaolinite and variable amounts of illite, quartz, calcite, boehmite, hematite and rutile/anatase. DTA show two endothermic peaks produced by the dehydroxylation of minerals: the first peak, at 530–538 °C, belongs to boehmite; the second peak, at 535–568 °C, corresponds to kaolinite. An exothermic peak at 950–978 °C is associated with mullite crystallization. The optimal sintering temperatures obtained from the gresification curves (firing shrinkage and water absorption) were 970 °C for carbonate-poor, illite-rich clays; 1100 °C for illite- and carbonate-poor samples; and near 1190 °C for carbonate-rich materials. The carbonate-poor samples fired at 1300 °C contain sillimanite and mullite, and the carbonate-rich materials are rich in gehlenite, anorthite, and hedenbergite. The mineralogy of these materials is sufficient to obtain ceramic materials with suitable properties, but not their low plasticity. They could be used in the formulation of bricks or as part of mixtures to produce refractory ceramics.