Affiliation:
1. Key Laboratory of Water Quality Science and Water Environment Recovery Engineering, Beijing University of Technology, Beijing 100124, China
2. State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China
Abstract
In this study, following the concept of “treating waste with waste”, magnetic chitosan carbon (MCC) was developed through the pyrolysis of chitosan/iron sludge (CHS) beads created using an embedding method in a closed environment for antimony removal. The results indicate MCC has a good magnetic recovery rate and that its magnetic saturation strength can reach 33.243 emu/g. The iron proportion and acid resistance of MCC were all better than those of CHS, and at 25 °C, its adsorption saturation capacity improved from 24.956 mg/g to 38.234 mg/g. MCC has a quick adsorption equilibrium time, and in about 20 min, 90% of the final equilibrium capacity can be achieved. The primary mechanism of Sb adsorption by MCC is the formation of an inner sphere complex between Fe-O and Sb, while surface complexation, hydrogen bonding, and interaction also play a function. Thus, MCC, a lower-cost and greener adsorbent for Sb removal, has been made using iron sludge. This enabled it to utilize iron sludge as a resource and served as a reference for the sustainable management of water treatment residuals.
Funder
National Natural Science Foundation of China
Beijing Outstanding Young Scientist Program
Scientific and Technological Research Program of Beijing Municipal Education Commission project
Science and technology innovation fund project of Beijing University of Technology—“Urban carbon neutralization”