Chemical and Morphologic Characterization of Sylvite (KCl) Mineral from Different Deposits Used in the Production of Fertilizers

Abstract

In the present work, four (4) samples of sylvite (KCl) from different deposits in Canada, Belarus and Germany were analyzed in order to determine the differences between them in terms of chemical composition, morphology and impurities present. Different non-instrumental and instrumental techniques were used. A scanning electron microscope analysis showed that the particles are completely amorphous. Bueno mineral has particles with the largest area (with 91.4% particles larger than 0.50 mm), and the BPC mineral samples have those with the smallest area (with 49.9% particles smaller than 0.50 mm). The Bueno mineral has the highest angle of repose. Bueno mineral has the highest surface area and pore volume when compared to the other KCl minerals. On the other hand, the BPC KCl mineral presented a lower surface area and pore volume. The problem mineral has the highest percentage composition of K. Blanco mineral did not present Al, and the element Mo was not detected in the Blanco and Bueno mineral. The IR bands of O-H, C-N, N-H and C=O bonds were observed. These results are useful for the fertilizer industry. These differences can produce adverse effects in a subsequent application in fertilizer production processes. Such differences can be attributed to the origin of this mineral, the way it is obtained and exploited, or to the transport and storage process through the use of anticompacting additives due to the high hygroscopicity of the mineral.