Research on Surface Integrity and Fatigue Properties in the Turning of TC17 Titanium Alloy Based on the Response Surface Method

Abstract

Titanium alloy parts are more and more widely used in the field of aerospace. In order to improve the service life of titanium alloy parts, the response surface method was used to study surface residual stress and roughness under different turning parameters. In addition, a mathematical model was established through multiple linear regression to determine the relationship between surface integrity parameters and fatigue life. The test results indicate that the turning parameters have an effect on surface residual stress in the order of feed rate > depth of cut > cutting speed and on surface roughness in the order of feed rate > cutting speed > depth of cut. The analysis results of surface integrity show that the residual compressive stress on the surface has the greatest impact on fatigue life, followed by surface roughness. The fatigue life increases with the increase in residual compressive stress and decreases linearly with the increase in surface roughness. The feed rate has a significant impact on residual stress and surface roughness. Therefore, under the experimental conditions of this paper, the appropriate feed rate can be selected to ensure that the  Ra < 2 μm and a large residual compressive stress is obtained.