Microstructure and Mechanical Properties of Ti6Al4V to Al2O3 Brazed Joints Using Ti-Ag/Cu-Ti Thin Films

Abstract

The processing and characterizing of bonding Ti6Al4V to Al2O3 brazed joints using interlayer thin films was investigated. The brazing was conducted in a tubular furnace with an argon flux at 980 °C for 30 min. The brazing fillers consisted of different combinations of thin Ag/Cu and Ti films with variable thicknesses. The joint interface analysis involved using digital microscopy (DM) and optical microscopy (OM). Microstructural characterization and chemical composition were performed via scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Mechanical properties were assessed through microhardness and shear strength tests. Brazing successfully produced interfaces with a combination of titanium films and Ag/Cu as brazing filler. The results revealed that the interface mainly comprises Ti2Cu, TiCu2Al, α-Ti, and Ti2(Cu,Ag). Some segregation of (Ag) was observed at the interfaces, but a decrease in its amount was observed when compared to joints produced using Ag/Cu fillers. The thickness of the titanium film in the brazing filler strongly influenced the integrity of the joints. The amount of (Ag) at the interface diminished as the Ti film’s thickness decreased, leading to an improvement in the mechanical properties of the joints. Using a combination of Ag/Cu and Ti thin films revealed a potential approach to reduce the segregation of soft phases at interfaces, promoting a significant improvement in joining metal to ceramic materials.