Description of Mesoscale Static and Fatigue Analysis of 2D Woven Roving Plates with Convex Holes Subjected to Axial Tension

Abstract

The static and fatigue analysis of plates made of 2D woven roving composites with holes is conducted. The parametrization of convex holes is proposed. The experimental results of the specimens without holes and with different shapes of notches are discussed. The experiments and the appropriate procedures are carried out with the aid of ASTM codes. The fatigue behavior is considered with the use of the low cycle fatigue method. The analysis is supplemented by numerical finite element modeling. The present work is an extension of the results discussed in the literature. The damage of plates with holes subjected to tension always occurs at the tip of the holes, i.e., (x = a, b = 0), both for static and fatigue failure. The originality and the novelty of this approach are described by the failure’s dependence on two parameters: n and the ratio of the a/b ratio characterizing the hole geometry. The fuzzy approach is employed to reduce the amount of experimental data.