Author:
Bragov Anatoly,Igumnov Leonid,dell’Isola Francesco,Konstantinov Alexander,Lomunov Andrey,Iuzhina Tatiana
Abstract
The paper presents the results of dynamic testing of two wood species: lime-tree (Tilia europoea) and pine (Pinaceae). The dynamic compressive tests were carried out using the traditional Kolsky method in compression tests. The Kolsky method was modified for testing the specimen in a rigid limiting holder. In the first case, stress–strain diagrams for uniaxial stress state were obtained, while in the second, for uniaxial deformation. To create the load a gas gun was used. According to the results of the experiments, dynamic stress–strain diagrams were obtained. The limiting strength and deformation characteristics were determined. The fracture energy of lime and pine depending on the type of test was also obtained. The strain rates and stress growth rates were determined. The influence of the cutting angle of the specimens relative to the grain was noted. Based on the results obtained, the necessary parameters of the wood model were determined and their adequacy was assessed by using a special verification experiment.
Subject
General Materials Science
Reference21 articles.
1. Manual for LS-DYNA Wood Material Model 143;Murray,2007
2. Historical and present-day references concerning impact on wood
3. Dynamic compression of cellular structures and materials;Reid,1993
4. Dynamic uniaxial crushing of wood
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献