In Situ Wettability Investigation of Aging of Sandstone Surface in Alkane via X-ray Microtomography

Abstract

Wettability of surfaces remains of paramount importance for understanding various natural and artificial colloidal and interfacial phenomena at various length and time scales. One of the problems discussed in this work is the wettability alteration of a three-phase system comprising high salinity brine as the aqueous phase, Doddington sandstone as porous rock, and decane as the nonaqueous phase liquid. The study utilizes the technique of in situ contact angle measurements of the several 2D projections of the identified 3D oil phase droplets from the 3D images of the saturated sandstone miniature core plugs obtained by X-ray microcomputed tomography (micro-CT). Earlier works that utilize in situ contact angles measurements were carried out for a single plane. The saturated rock samples were scanned at initial saturation conditions and after aging for 21 days. This study at ambient conditions reveals that it is possible to change the initially intermediate water-wet conditions of the sandstone rock surface to a weakly water wetting state on aging by alkanes using induced polarization at the interface. The study adds to the understanding of initial wettability conditions as well as the oil migration process of the paraffinic oil-bearing sandstone reservoirs. Further, it complements the knowledge of the wettability alteration of the rock surface due to chemisorption, usually done by nonrepresentative technique of silanization of rock surface in experimental investigations.